MK8 M6 se závitem z nerezové oceli tryskací extrudér tisková hlava - stříbrný 0,4 mm 1,75 mm
Kupón:
Propagace:
Support COD payment Warehouse & Fee
SelectProduct Options
SelectRecenze (46) Zobrazit více
- Nozzle diameter 0.6. It adapts correctly to the Creality Ender 3 and the results are excellent spending less time on printing. For correct use, level the hot bed after changing the nozzle and adjust the extrusion temperature. Since steel is a worse conductor than brass, it is advisable to increase the extrusion temperature 10-15º with respect to common nozzles. I recommend this product.
Popis
● Materiál: nerezová ocel
● 1.75 mm tryska
Velikost: 15,5 mm x 7 mm
Přesnost trysky: 0,2 / 0,3 / 0,4 / 0,5 / 0,6 / 0,8 mm
Vnější průměr šroubu: 6 mm (délka šroubu asi 7 mm)
Vhodné pro vlákno: 1,75 mm
0,2 mm 1,75MM = průměr trysky 0,2mm pro vlákno 1,75mm
0,3 mm 1,75 mm = průměr trysky 0,3 mm pro vlákno o průměru 1,75 mm
0,4mm 1,75MM = průměr trysky 0,4mm pro vlákno 1,75mm
0,5 mm 1,75 mm = průměr trysky 0,5 mm pro vlákno o délce 1,75 mm
0,6mm 1,75MM = průměr trysky 0,6mm pro vlákno 1,75mm
0,8mm 1,75MM = průměr trysky 0,8mm pro vlákno 1,75mm
● Tryska 3,00 mm
Velikost: 15,5 mm x 7 mm
Přesnost trysky: 0,3 / 0,4 / 0,5 / 0,6 / 0,8 mm
Vnější průměr šroubu: 6 mm (délka šroubu asi 7 mm)
Vhodný pro vlákno: 3,0 mm
0,2mm 3,00MM = průměr trysky 0,2mm pro 3,0mm vlákno
0,3 mm 3,00 mm = průměr trysky 0,3 mm pro 3,0 mm vlákno
0,4 mm 3,00 mm = průměr trysky 0,4 mm pro 3,0 mm vlákno
0,5 mm 3,00 mm = průměr trysky 0,5 mm pro vlákno o tloušťce 3,0 mm
0,6mm 3,00MM = průměr trysky 0,6mm pro 3,0mm vlákno
0,8mm 3,00MM = průměr trysky 0,8mm pro 3,0mm vlákno
Specifikace
Rozměry a hmotnost | Hmotnost výrobku: 0,0030 kg Hmotnost balení: 0,0035 kg |
|---|---|
Obsah balení | obsah balení: 1 x tryska |
Recommended Products
Sponsored Products
MK8 M6 se závitem z nerezové oceli tryskací extrudér tisková hlava
Barva
Velikost
- 43
- 1
- 0
- 0
- 2
- Vše ( 46 )
- ( 15 )
- ( 2 )
- Nozzle diameter 0.6. It adapts correctly to the Creality Ender 3 and the results are excellent spending less time on printing. For correct use, level the hot bed after changing the nozzle and adjust the extrusion temperature. Since steel is a worse conductor than brass, it is advisable to increase the extrusion temperature 10-15º with respect to common nozzles. I recommend this product.
- Not much to say, a lot stronger than the brass nozzles. If you're nozzle hits the bed from time to time then the stainless steel nozzle is a lot stronger and will not deform when it hits the print bed.
- Fast delivery in good packaging.The same dimensions as the original one of the Alfawyse U30.As the cost is very low, It seems to me easier to replace a stuck nozzle, continue printing. During this time, using an oven or a hot air gun, trying to uncork the removed nozzle. More easier to handle when out of the printer
- Como conjunto essencial e de qualidade superior, e que serve de complemento à impressora 3D, igualmente adquirida na GearBest.Garante um excelente Upgrade e por um preço imbatível.
- Como conjunto essencial e de qualidade superior, que serve de complemento à impressora 3D, igualmente adquirida na GearBest.Garante um excelente Upgrade e por um preço imbatível.
- Como conjunto essencial e de qualidade superior, que serve de complemento à impressora 3D, igualmente adquirida na GearBest.Garante um excelente Upgrade e por um preço imbatível.
- buses parfaites, de bonne qualité je recommande vivement ;)buses parfaites, de bonne qualité je recommande vivement ;)buses parfaites, de bonne qualité je recommande vivement ;)
- sadly I will not use it because needs very high temperatures to work well but great craftmanship and was cheap
- Very good nozzles. I use them on my 3D printer Creality 3D ender 3.High quality and accurateI recommend to buy
- Got to have spare parts off all kinds, especially for hotend so heating elements and these hardened steel nozzles should last longer!